Solid three layers panel Ash

Order cut-to-size solid ash timber board online

Easily order cut-to-size solid ash timber boards online. This way, you can create a robust and sturdy piece of furniture in your interior in no time at all. You can have our solid timber panels cut into various shapes and finishes. Whether you need an industrial table or want to add some warmth to your home with solid wall shelves, anything is possible. How handy is that?

Solid ash timber board: what is it?

Ash is characterized by a clear, coarse grain pattern. The colour comes close to a pearl appearance that changes from white/pinkish to yellow when exposed to daylight. If you treat ash wood well, it will last for years. Ash is not to be confused with Maple, which is soft and has a minimal grain pattern. It is advisable to sand the board well before finishing it with stain, varnish or oil. This way you can be sure that you are finishing the original wood colour. Keep in mind that solid ash wood warps. This makes it less suitable as doors, but all the more suitable for furniture or displays.

European Ash is a wood species that is relatively flexible and resilient. In addition, ash wood is strong and is therefore a popular wood species for making frames and furniture. Think of (wall) panelling and tabletops. Ash can be stained well and is very suitable as a substrate for a varnish.

Ash is supplied in different visual qualities. A/B describes the appearance of the sheet and therefore has nothing to do with the structural strength of the material. The term A/B means that the top side of the sheet has visual quality A and the underside has visual quality B. This means that the top is almost completely free of knots. Occasionally, there may be a small knot here and there, but it will be no larger than 4 millimetres. The underside has visual grading B and can therefore have a somewhat coarser appearance. Here, knots of up to 7 millimetres are allowed. The heartwood and sapwood of the beech differ little.

Read here more about the quality of timberboards.

These solid boards are composed of three layers which are glued together crosswise. The two top layers are of high quality. The 5 mm thick top layers consist of falling wide sections of approx. 80 to 140 mm. The 10 mm thick core makes it a sturdy and stable whole. The core consists of the same wood as the top layers. In the core, all remaining material is processed that is not suitable for the visible sides: too short and too narrow wood, sapwood and other defects. The whole trunk is used, leaving almost no residual waste. Due to the 3-layer structure, this type of board is the most stable of all solid glued boards.

The direction of the wood grain

Timber board has a visible wood grain. The wood grain pattern always runs in the longitudinal direction. When sawing the sheet, we maintain that the longitudinal dimension is also the longitudinal direction of the wood grain. So be careful when filling in the measurements, so that the flames of the wood grain all run in the right direction!

Available thicknesses of solid ash timber board

Solid timber boards can be ordered in various thicknesses. You can easily specify your desired thickness during the ordering process. This way you can be sure that the sheet material meets your requirements: both the size and thickness of the material. The following thickness(es) are available: 20 mm.

Machining solid ash timber board

European ash can easily be sawn, milled or otherwise machined. This type of wood is easier to machine than, for example, beech wood. The wood is easy to sand and is a suitable substrate for a coloured stain or varnish. Because of its grain, the use of sharp tools is recommended. Ash boards are easy to assemble using nails and screws. However, pre-drilling is recommended because it is a hard wood species, but this is not necessary.

Ash can warp in humid conditions and discolour when exposed to too much daylight. Therefore, before use, make sure you sand this sheet material and apply a good varnish, stain or oil. Is your stain or varnish available in a UV-resistant version? Choose this so that the wood discolours minimally after finishing. 

Specific applications of solid ash timber board

Ash is ideally suited for applications such as doors, door frames, stairs, walls and furniture. We do not recommend using the material outdoors, as it can warp. When solid wood is exposed to temperature differences or is used in humid areas, there is a high probability of discolouration or deformation of the board.

Alternatives to ash timber board

Is Ash not the right type of wood for your project or are you looking for a variant that is more robust and darker? Then opt for solid timberboard oak or solid timberboard mahogany. View our other solid wood types below: