Childrens corner for a small space

Description of Bob

Our project was to create a playcorner for our children ( 2 & 4 years old ) with space to play but also the possibility to put it away again. So we did this with 2 standard ( ikea ) cabinets and 2 boards cut to size via TOSIZE.fr. We're still working on a back wall to hang stuff on. That would complete the project.

How I made this project

Children's corner consisting of 2 ikea cabinets ( trofast ). Through TOSIZE.fr we ordered 2 18mm pine boards cut to size. Via the website easily entered the dimensions which were cut to the millimetre. The ikea cupboards are 43.6 cm deep, so we took this as the width. As we had to make a 90-degree angle, we had the 2 boards mitred by correct measurements. Our cutting list; 1x Form: Rectangle with bevelled short edge | (145.0, 101.4) x 43.6 cm 1x Form: Rectangle with bevelled short edge | (99.0, 55.4) x 43.6 cm

Dimensions of my DIY project

145 over the long side ( this can of course be more or less depending on your available space ) 99cm over the narrow side 43.6cm is worktop width